CNC and Manual Milling
(1) FADAL VMC 20  CNC Mill / travels 20.” x 16.” x 20.”
(1) Haas VF-3 CNC Mill Travels: 40.” x 20.” x 25.” / 4th axis
(1) Sharp HMV 50 Prototrak 2 axis CNC Knee Mill 
(4) Bridgeport Knee Mills,   2hp. 9″ x 42″ / 48″ travels. w/ Accurite readouts
(1) Hitachi No# 2 Horizontal Mill.  w/ vertical attachments.

Lathes

(1) Leblond “Regal” 15″ x 56″  Tooled w/chucks and taper attachments..
(1) Hardinge Precision Toolmakers Lathe.  8 station w/auto threading attachment

Grinding Dept:

(1) K.O. Lee  6.” x 12.” Manual Precision Surface Grinder
(1) K.O. Lee  6.” x 18″ Manual  Precision Surface Grinder.  / Linear table w/ clutch drive.
(1) K.O. Lee  Precision Tool and Cutter Grinder / Air spindle attachment / Completely tooled 
(1) K.O. Lee  10.” x 24.” 3 axis Automatic Surface Grinder / gage quality flatness w/ .0001 to .0002″
(1) Brown and Sharpe  10.” x 24.” 2 axis  Hydraulic Surface Grinder
(1) Myford 5″ x 12″ Cylinderical grinder. / Complete w/attachments / Internal grinding unit.
(1) Moore #1 Jig Grinder. Hi/Low speed heads, Precision Rotary table (accurate in seconds), Sine plate
(2) Sunnen Hone. Complete with tooling and stones

Wire-EDM

(1) Makino U53K CNC WIRE EDM / Travels: (XYZ) 21.6″ x 14.6″ x 8.7″ / 5 axis / Drop Tank / Travel Wire.
(2) MAKINO ECQ53 CNC WIRE EDM. Travels: (XYZ) 20.9″ x 14.2″ x 12.8″ / 30 deg. taper / 5 axis / AWT.

Ram EDM

(1) Makino EDNC 64 RAM EDM  / 60 amp power / 370 lbs electrode cap. / drop tank rotating “C” Axis..
(1) AGIE Mondo 3     RAM EDM   / Rotary C axis
(1) AGIE  AB-H45L    RAM-EDM   / 45 amp BI Pulse Supply.

Radial Drill

(1) Cincinnati Bickford Radial Drill.  4 ft. 9″

Saws:

(1) Kalamazoo 9F Hydraulic feed horizontal saw.
(1) JET Roll-in / Hydraulic feed saw, 14″ opening.
(1`) Kalamazoo /  14.00″ Chop Saw.

Stamping Presses:

(1) 150ton      OBI       BLISS  w / Feedline and Coiler
(1) 120ton      OBG     HEIM    w / Feedline and Coiler
(1) 65 ton       OBG     BENCHMASTER w/ Feedline and Cradle
(1) 55ton        OBG     HEIM     w/   6.00″ Jaybird Feeder.
(1) 25ton        OBI       ROUSELLE
(1) 15ton        OBG     OHMA     Air/Hydraulic Draw Press
(2) 10ton        OBI       BENCHMASTER
(1) 10ton        OBG     PERKINS
(1)  3ton         OBG     PERKINS 
(1)  Jaybird   Air Feeder  /    12.” x 20″ x .1875″
(5)  Rapid Air Feeder / up to 6.” wide and 8.” strokes
(1)  Air-Feeds Air feeder / 24.” wide x 30.” stroke x .090″
(1) Jayco Coil Cradle w/straightener
(1) Little 3K uncoiler 

Inspection:
Kodak 14″ Comparator.
Federal Air gages.
Starrett 12.” Digi-check” height gage set.
(3) 30.” x 48″ Granite plates
(1) Robbins 10.” Compound Sine
(4) Rotary Height sets / up to 24.”

(5) Electronic Calipers / up to 40.”

Material Handling

(1)  Harrington Crane Tear down Station.
(1) 15K  Clark Forklift.
(1) 13K  Clark Forklift.
(1)  8K   Hyster Forklift.
(1)  5K  Caterpillar Forklift. 
(1)  3K   TCM Forklift.
(1)  3K   Clark Forklift.

Trucks:

(1) Chevy 15K w/ 12ft. flatbed.
(1) Chevy Tahoe LT 4×4
(1) 20ft. Cornpro trailer.
(1) Peterbilt Tractor w/ 53ft Aluminum drop deck trailer. (local company)